Discontinued JCC three-circuit track adjustable connector in black/white — 147 units of new-old-stock surplus, held ex-warehouse Leicester, UK. Specification-matched variable-angle joint for legacy JCC three-circuit track installations.
Held as UK stock, ex-warehouse Leicester. This SKU is one line within the JCC whole-lot commercial-lighting parcel (~8,585 units, GBP 8,500 ex-VAT for the entire lot), listed here for reference only. It is not sold separately; the parcel is supplied as a single lot, to trade.
Box-label photo evidence — JC88011 three-circuit track adjustable connector.
The JCC JC88011 is the adjustable connector for JCC’s three-circuit track system — the surface- and suspension-mounted track platform behind a great many retail, gallery, hospitality and commercial display lighting schemes. Where most track joints are fixed at ninety degrees, an adjustable connector is the piece that lets two runs of three-circuit track meet at a variable angle, following the geometry of a room rather than forcing the track into a rigid rectilinear grid. Its elongated body — roughly 24 cm long in this holding — carries all three switched circuits plus earth continuity across the pivot, so the lighting designer keeps independent control of separate lamp groups right through the bend. Because the track profile and the internal contact block are JCC-specific, an adjustable connector from another maker will not seat or make contact correctly, which is exactly why discontinued JCC track infrastructure such as the JC88011 stays relevant to the contractors who still maintain these installations.
This holding is authentic new-old-stock (NOS) surplus: 147 unused JC88011 connectors carried over from JCC distribution, each measuring about 24 × 4 × 4 cm and weighing around 0.2 kg, in the black/white finish set out on the JCC coding. The stock is held ex-warehouse in Leicester, United Kingdom, and is photographed against its box labelling as part of the buyer pack. As a passive mechanical-and-contact assembly with no lamp, no driver and no control gear of its own, the JC88011 sits entirely outside the lamp bans and Ecodesign measures that complicate some lighting clearance — there is nothing here a UK or export buyer is restricted from reselling or fitting.
For the trade, the value is concentrated in specification matching. Adjustable connectors are the low-volume, awkward-angle fittings that a site rarely stocks in depth and that a wholesaler struggles to source once a range is withdrawn. When a store refit, a museum re-hang or an office fit-out needs to extend or re-route an existing JCC three-circuit layout around a non-square corner, the original adjustable connector is the only part that fits — and JCC no longer produces it. A maintenance contractor holding the correct specification-matched spares therefore competes against no current-market equivalent, which is what turns discontinued JCC track components into a durable resale line rather than ordinary clearance. The JC88011 also cross-sells with the L, T and X connectors and feeder plugs held elsewhere in this parcel.
Commercially, the JC88011 is offered as UK surplus / liquidation stock for trade and resale only. It is not a retail product and is not sold as a stand-alone line: it forms part of Austral Prime’s JCC commercial lighting whole-lot bulk package — roughly 8,585 units across infrastructure, fittings and architectural hardware, supplied as a single job lot for GBP 8,500 (ex-VAT) ex-warehouse Leicester. The whole-lot structure is deliberate: it lets one wholesale buyer take the entire discontinued JCC range at clearance economics and then place the individual lines — connectors, feeds, endcaps, downlights — into their own maintenance, refurbishment, retrofit or export channels at trade margin. UK supply is subject to VAT at the standard rate (reclaimable by VAT-registered buyers); exports removed from the UK may be zero-rated on valid evidence.
The three-circuit track the JC88011 joins remains firmly in service. Three-circuit track is the workhorse of flexible commercial lighting precisely because it lets a single continuous run drive up to three independently switched groups of heads — ideal where a retailer wants window, feature and general zones on separate controls. A very large share of that installed base has already been re-lamped to LED spotlights and track heads, which means the underlying track, its power feeds and its connectors keep working long after the original lamps were retired. Holding the correct adjustable connector lets a contractor reconfigure or repair those retrofit-ready circuits without proposing a wholesale rip-and-replace to the client.
That is the quiet strength of discontinued-range spares as a resale category: demand is inelastic and supply is finite. This JC88011 holding is ex-catalogue, ex-distribution closeout inventory — the sort of surplus that rarely reaches the open market. Bought inside the JCC whole-lot package, it gives a wholesaler a defensible, low-competition line to list against searches such as ‘discontinued JCC track adjustable connector’ or ‘three-circuit track spares’, while the bulk clearance economics protect resale margin. Typical buyers for stock like this are electrical wholesalers, lighting refurbishers, JCC-system maintenance specialists, pallet and job-lot liquidation traders, and export resellers shipping into the EU or Australian markets. If the JC88011 or the wider JCC infrastructure group fits your book, the full per-SKU manifest — quantities, locations, dimensions and box-label photography — is available on enquiry. Title and risk pass on dispatch from Leicester; buyers collect or arrange their own freight. Sale is ‘as is’, on documentary evidence, with photographs supplied ahead of commitment. Trade only.
The JC88011 adjustable connector is supplied as part of the JCC whole-lot parcel. Register interest in the lot or request the full trade manifest and photographs.